|
6N1P, 6N1PVI, 6N1PEV (6H1n, 6H1nBN, 6H1nEB)
Double triodes, used as an low frequency power amplifier.
Tube have military and "OTK"
mark.
General characteristics:
| Type |
6N1P |
6N1P-VI |
6N1P-EV |
| Filament (heater) current, mA |
600±50 |
600±50 |
600±50 |
| Anode current, mA |
5,6 - 10,5 |
7,5±1,5 |
7,5±1,5 |
| Reverse grid current, mkA |
<1 |
<0,5 |
<0,2 |
| Dissipate cathode-heater current, mkA |
<15 |
<15 |
<12 |
| Mutual conductance, mA/V |
4,5±1,0 |
4,45±0,65 |
4,5±0,8 |
| Gain coefficient |
35±7 |
35±7 |
35±7 |
| Vibration noise (by RA=2 KOhm), mV |
<100 |
<80 |
<50 |
Inter electrode capacitance, pF:
input |
3,1±1,1 |
3,3±0,9 |
3,05±0,55 |
| output 1st triode |
1.6±0.5 |
1.75±0.5 |
1.75±0.5 |
| output 2nd triode |
1.7±0.5 |
1.95±0.5 |
1.75±0.5 |
| transfer |
1.85±2.2 |
<2.6 |
<2.6 |
| Operation period, hrs |
>3000 |
>3000 |
>5000 |
Limited operating values
| Type |
6N1P |
6N1P-VI |
6N1P-EV |
| Filament voltage, V |
5,7-7 |
5,7-7 |
6-6.6 |
| Anode voltage, V |
300 |
300 |
250 |
| Cathode - heater voltage, V |
100 |
120 |
120 |
| Cathode current, mA |
25 |
25 |
25 |
| Anode dissipation (each triode), W |
2,2 |
2,2 |
2,2 |
| Resistance in grid circuit, MOhm |
1 |
2 |
0,5 |
Operating environmental conditions
| Type |
6N1P
|
6N1P-VI
|
6N1P-EV
|
| Acceleration of vibration loads, g |
2,5
|
6
|
6
|
| by frequencies, Hz |
--
|
5-600
|
5-600
|
| Acceleration of multiple impacts, g |
12
|
150
|
150
|
| Acceleration of single impact, g |
-
|
500
|
500
|
| Continuos acceleration, g |
-
|
100
|
100
|
| Ambient temperature, C |
-60 to +70
|
-60 to +90
|
-60 to +90
|
| Relative humidity at up to 40 C, % |
98
|
98
|
98
|
All datasheets in pdf and DjVu file here.
|
Hi-End tubes
;)
