BY MANUFACTURES | BY KEYWORD’S | |
6S19P / 6C19P tube. Matched pair. Gold grid |
Description
The 6s19p triode is designed for operation as a regulator tu in electronic voltage stabilizers.
The 6S19P triodes are miniature devices enclosed in glass bulb and are provided with a nine-pin base, rigit leads and an indirectly heated oxide-coated cathode.
The 6S19P triodes are resistant to ambient temperature from -60 to +70°C and relative humidity of 95 to 98% at +40°C, as well as to mechanical loads: vibration loads up to 2.5g and multiple impact loads up to 12g.
Best Quality, the Sound is nice - authentic vintage tone
The accuracy of matching a pair no less ±95%. Matched with our HI-END tube tester L3-3. Svetlana factory.
All tubes new, military equipment and have "OTK" mark. Near equivalent: no have.
The tube is manufactured by the Uljanovsk, Russia. Have date codes of 197x years. Tube have Gold grid.
General characteristics:
Type: 6C19n
Filament voltage, Volt: 6.3
Anode voltage, Volt: 110
Grid voltage, Volt: -7
Resistance in cathode circuit, Ohm: 130
Filament (heater) current, A: 1±0.1
Anode current, mA: 95±15
Reverse grid current, mkA: 3
Dissipate cathode-heater current, mkA: 50
Mutual conductance, mA/V: 7.5±1.5
Internal resistance, Ohm: 400±100
Vibration noise (by RA=2 KOhm), mV: 500
Inter electrode capacitance, pF:
- input: 6.5
- output: 2.5±1.5
- transfer: 8
Operation time, over h: 2000
Limited operating values:
Filament voltage, V: 5.7—6.9
Anode voltage, V: 350
Grid voltage, V: -1.5—200
Cathode – heater voltage, V: 250
Anode current, mA: 140
Anode dissipation, W: 7—11
Resistance in grid circuit, MOhm: 0.5
Operating environmental conditions :
Acceleration of vibration loads, g: 2.5
by frequencies, Hz: 50
Acceleration of multiple impacts, g: 12
Acceleration of single impact, g: —
Continues acceleration, g: —
Ambient temperature, °С: –60 to +70
Relative humidity at up to 40°C, %: 98
All datasheets here.